Webcome to Zhejiang Jovyea Plastic Co.Ltd.

+86-18257261120 sales@bestpvcfence.com

How to build a 6′ picket fence

A conventional picket fence is a simple way to create a safe barrier around your play area. picket fences can be painted or embellished to make them extra playful and to feature splendor and fun to their capability.

Substances & gear
Substances quantity
4x4x8′ boards 2
2x4x10′ board 1
12 1x6x6′ boards
2″ deck screws 1lb
80lb luggage of concrete 2
Equipment wished
Miter saw
Pencil
Tape measure
Carpenter’s square
Protection glasses
Post-hole digger
Drill
Screwdriver bit
Degree
Guidance instructions

Type all materials into piles by way of like object to ensure you have substances wanted to finish challenge.

Take each of the 4x4x8′ forums. cut every right down to 90″, for a total of 4x4x90″ portions.

Take the 2x4x10′ board. reduce into [2] 60″ portions.

Take the 1x6x6′ forums. cut angles on one quit of every to create pickets on the perspective you preference.

Build instructions

Inventory and kind all of your materials.

Dig holes 6″ in diameter and 18″ deep. Make the holes 5′ aside, center to center.

Set a 4x4x90″ publish in each hollow and set with concrete. ensure that the posts are 5′ aside center to middle, and are stage and aligned with every different.

Once the concrete has begun to set, connect the 2x4x60″ pieces to the 4×4 posts. the lowest 2×4 ought to be 18″ from the ground. The top 2×4 have to be 18″ down from the pinnacle of the 4×4. the edge of the 2×4 must hit the center of the 4×4 posts.

Attach the 1x6x72″ forums to the 2x4s so that they’re touching, with the outer 1x6x72″ forums hitting the middle of the 4×4 posts. you may have leftover pickets with which you may retain for an extended fence, if favored.

Repeat all steps as desired for a longer fence.

Dig holes 6″ in diameter and 18″ deep. Make the holes 5′ apart, center to center.

Set a 4x4x90″ post in each hole and set with concrete. Ensure that the posts are 5′ apart center to center, and are level and aligned with each other.

Once the concrete has begun to set, attach the 2x4x60″ pieces to the 4×4 posts. The bottom 2×4 should be 18″ from the ground. The top 2×4 should be 18″ down from the top of the 4×4. The edge of the 2×4 should hit the center of the 4×4 posts.

Attach the 1x6x72″ boards to the 2x4s so that they are touching, with the outer 1x6x72″ boards hitting the center of the 4×4 posts. You will have leftover pickets with which you can continue for a longer fence, if desired.

Repeat all steps as desired for a longer fence.

PREV
NEXT

RELATED POSTS

Inquiry

Skype

WhatsApp

WangWang

QQ
Email me

Mail to us