Webcome to Zhejiang Jovyea Plastic Co.Ltd.

+86-18257261120 sales@bestpvcfence.com

installing vinyl fence

vinyl fencing comes in many styles and hues. it is a renovation-unfastened option that doesn’t climate like timber fencing does. to put in vinyl fencing, you want most effective attach pre-made fence sections to posts. vinyl expands in warm temperatures and contracts in bloodless temperatures, so keep away from putting in your fence on extremely hot or bloodless days or your fence may warp and wreck.
part1:preparing the project
1.prepare the floor for the fence. it’s crucial to clean and smooth the region wherein the vinyl fence can be hooked up to make the process as smooth as viable. take away any bushes, plant life, timber or stationary objects that are within the way of your planned fence.
2.measure the vicinity. relying on the scale and form of your backyard, or the place you need to fence off, you could need to go right alongside the assets line, or degree different configurations and shapes. regardless of the case, you need to discover how a good deal fencing you may want to buy with the aid of measuring the desired area. take those measurements to the house improvement shop to shop for supplies.
you could region stakes on the corners of your fence’s perimeter and use them to rope the region off before the project begins, or you can spray paint the fence’s perimeter.
three.purchase the vinyl fencing and posts for the location. you should purchase vinyl fencing in lengths that variety from 2 to eight ft (zero.6 to 2.4 m). these lengths you region between vinyl fence posts. if you are fencing a very big area, purchase larger sections so that you can bury fewer fence posts.
your material should be about one inch (2.five cm) thick, four inches (10 cm) wide, and four to six ft (1.2 – 1.eight m) lengthy. you’ll also want 12 in (30 cm) timber stakes and four screws for brief bracing.

ensure you also get enough concrete for each put up.
in case you want an entry point alongside the fence, it is also critical to purchase a vinyl gate kit that suits with the fencing you choose.
four.mark each post region. after purchasing enough posts, fence lengths, and the gate kits essential to make your fence, mark the post positions and the lengths between the favored posts to make certain your vinyl fence section and hardware will match. you cannot trim vinyl fencing sections, so that you should be sure approximately your measurements.
5.lay out the fencing sections. between each place wherein you plan to dig a hollow, it’s a very good concept to set everything as much as make the set up system simpler. make sure your posts are within the right place earlier than digging your holes.

part2:installing the fence
1.dig holes for your fence posts. use both a electricity auger or a hand post-hole digger to dig holes which are 10 inches (25.4 cm) in diameter. submit holes have to be deep enough to keep 1/three the duration of your submit, plus 6 extra inches for a gravel base.[6]
if you do not have an auger or digger, you can hire a electricity auger at a domestic improvement save, or you may dig them with a shovel, though it’ll take plenty longer.
2.area the fence posts one after the other. as soon as you’ve got dug the holes for the posts, the next step is to put in each put up securely earlier than connecting them with the vinyl sections. constantly defer to the producer’s instructions for installation, however usually its encouraged to install posts secured with gravel and urban.
insert a 2 foot (sixty one cm) long 4″ x 4″ or 5″ x five” and use 1.5 in (three.8-four cm) screws on at the least two aspects to secure the publish to timber. area the publish into hollow on gravel base after which pour concrete into hollow and lightly around entire submit. forestall six inches (15 cm) underneath floor stage to feature soil for grass whilst concrete is cured.

take a look at to make certain the pole is plumb the usage of a level, and circulate directly to the next publish hole. retain installing all the posts and go back to the start and make sure it is seated level again.
three.slope the concrete. use a trough to scrape any excess concrete far from the posts so that the concrete slopes down far from the pole. this prevents water from pooling across the pole. let the concrete dry completely.
four.install the vinyl fence sections among every put up. usually, vinyl fence sections snap proper into region. observe the particular manufacturer’s instructions concerning vinyl fence sections, as some may slide halfway into the submit. attach the rails to the ends of every segment with screws, if essential, after which comfortable the rails to the posts inside the ground.
pre-drilling a pilot hole earlier than installing your rail screws may be helpful and may be important.
five.connect the vinyl put up tops with the hardware furnished. once more, defer to the manufacturer’s commands. typically, maximum vinyl fence kits will include decorative toppers for the posts that you could snap on.







Email me

Mail to us