Webcome to Zhejiang Jovyea Plastic Co.Ltd.

+86-18257261120 sales@bestpvcfence.com

Picket fence

Picket fence is a kind of fence typically used decoratively for domestic boundaries, distinguished by their equally spaced vertical boards, the pickets, hooked up to horizontal rails. Picket fences are significantly widespread within the u. s., with the white fencing returning to symbolize the perfect bourgeois residential district life. till the introduction of advertising within the Eighties, cricket fields were sometimes encircled by picket fences.

Picket fences are significantly widespread within the u. s., wherever the fashion has been used since America’s earliest colonial era and remains widespread nowadays. they’re an ornamental thanks to contain pets and youngsters while not interference views, and are used around each front and back yards. historically picket fences were created out of wood and painted white (or whitewashed), however currently picket fences are wide accessible in vinyl resin (PVC).

A fencing is mostly thirty six to forty eight inches (91 to 122 cm) tall. A horizontal prime rail and bottom rail are hooked up to fence posts, that are put in upright into the bottom. equally spaced boards are mounted vertically to the rails. These boards with pointed tiptop are known as “pickets” for his or her likeness to the pointed stakes traditionally employed by foot to repel cavalry.

Picket fences is made from many sorts of materials. traditionally, wood has been the foremost widespread material used for picket fences. This wood is untreated, treated, or naturally insect and decay resistant. different non-wood choices are available; as well as vinyl, aluminum, and PVC.

Picket Fence Panels


Picket fence panels have associate picture, ancient vogue. Picket fences are excellent for front gardens and make a boundary while not block any views. Our vary of picket fencing is formed from top quality pvc to confirm sturdiness. Fence panels are offered with a rounded prime or a flat prime, and are available in 3ft and 4ft heights. we have a tendency to stock each dip treated and pressure treated picket fencing, thus you'll select the right possibility for your own garden. Our vary of pressure treated picket fencing is ideal if you are looking for low maintenance garden fencing.


Popular for each front gardens and sectioning off areas of back gardens, paling panels are trendy and ancient. permitting light-weight to labor under to assist plants grow, while still keeping kids and pets secure, it is easy to work out why such a big amount of go for picket fencing.


Stylish, durable and trustworthy – this is often our good vary of palisade vogue picket fencing. made of FSC certified pvc to confirm the simplest quality panel, they are available in an exceedingly vary of heights to suit each your front or back garden.


This type of fencing offers nice price for cash and may even be wont to produce a picket vogue fence around a sporting marquee or club house. Constricted from top quality vinyl, these fence panels feature 95mm wide, 16mm thick boards supported by 3 horizontal batons to form a trendy and durable fence panel. we've a variety of heights and styles on provide thus you are certain to notice what you are looking for right here.


Picket Fence Gate


PVC picket fence gates are created mistreatment the identical materials as your fence. you'll select from a variety of colors or designs that either match or will be created to stand-out making a feature.


The hardware used is specifically designed to be used with PVC fencing and is created of the best quality materials. The hinges used are adjustable up, down, in and out. that means you'll simply and accurately suit your gates.


Gates are created employing a steel subframe, and reckoning on the scale of the gate we are going to additionally incorporate a steel cross brace.


Gates use the identical Vinyl profiles as your fencing, that means your gate can seamlessly mix into your fence. Or will be created to face out.


Our dedicated fabrication team will facilitate your style the proper gate for your fence.


How to Install a Picket Fence


There are few things as heat and hospitable as a white picket fence. A properly engineered and put in fence will beautify a home's landscape, outline property lines and add a small indefinite amount of security. Building a fence from scratch, even a brief fence, takes quite} little bit of time and needs an arsenal of woodwork tools.


Fortunately prefab fencing sections build it a lot of easier for the typical home-owner to put in their own fence. The preassembled fencing panels are available in a good type of sizes and designs, together with picket, stockade, and square spindle.


The hardest a part of any fence installation is creating by removal the postholes. the extent of problem, not amazingly, depends on the fence length and hardest of the soil. For a brief fence, use a manual post-hole digger. However, if you have quite a dozen close to holes to dig, contemplate transaction a gas-powered post-hole digger.


How To Build A Picket Fence


Step One – you'll be able to Dig This


Use hole diggers or an influence auger to form holes concerning 24″ deep, four feet apart.


Determine however tall you wish your fence (usually between 24″ and 42″) and add simply over 2 feet thereto. (you’ll return and cut the ace off level later)
Set the posts, plumb and sq. to the road of your fence, and set the bottom in concrete.


Step two – Hanging Out


use beam hangersOnce the posts are geared up and also the concrete has dried. Run level line on all of your posts at level one in. below the post height you wish. Use a “line level”, a water level, or a daily level and a helper to create certain your line is level.


Mark every post at the peak of the string. that's the peak of the highest of a typical 2×4 beam hanger, offered from your native building provide store. Since the fence are going to be utterly painted white, I don’t worry that little of metal that may still be showing. victimization the hangers makes the duty abundant quicker.


Step three – On the level, but on the board.


Run pressure treated 2×4 boards from hanger to hanger, between the posts. If you probably did your line right, there's ne'er a necessity to bring out the extent once more. and also the hangers can provide you with some lattitude along with your cuts. a touch short is okay as long because it is well seated within the beam hanger.


Measure down from the highest hanger and set all of your bottom hangers at the identical distance down. more or less 6″ on top of the bottom to the underside of the hanger.


Step four – Slat Happy


Cut slats out of pressure treated 1×4’s. i'd place a board directly against every post (to cowl abundant of the metal hanger), then live between them and determine regularity. Don’t worry an excessive amount of. If you have got to “rip” a board as a result of your spacing gets out of whack, it’s not a giant deal. Life goes on.


You can either screw these on or nail them with a nail gun. you actually can’t nail them on with a hammer terribly simply due to the bouncing and shaking around. If you opt to use screws you have got to come to a decision if you wish to travel from the front or the rear.


If you have got a helper, you'll be able to screw it from the rear aspect and not see any fastners from the front, however it takes 2 individuals as a result of the board has got to be ironed firmly in situ.


Jovyea is a professional Chinese manufacturer(factory/wholesaler/suppliers) that is concerned with the design, development and production of picket fence profiles.Our industrial chain is complete, good quality, good price. All of our products comply with strict international quality standards,our products have been the majority of buyers unanimously recognized.





Email me

Mail to us