vinyl fence post
Vinyl Fence Install method
At Nationwide Fence offer, we’ve developed a proprietary methodology that produces it straightforward to put in fencing through all four seasons of the year in record time, while not removing dirt, while not mistreatment cement, and while not the all-day cleanup that takes place once the duty is finished. Take a better check up on simply however straightforward our installation method is:
1.MARKING OUT THE PROJECT
Step one is marking out your project, even as you’d the other fence install. take away any rubble, obstacles, bushes, plants or trees from the realm wherever the fence are going to be put in. Then, stake out the perimeter of the fence, so run a string around every stake, thus you’ve got a visible of precisely wherever your fence goes to be placed. Once you’ve got your project marked out, it’s time to drive your posts.
2. DRIVING GALVANIZED POSTS
Is there something you dread additional throughout associate degree install than excavation posts? If you’re lucky, you’ve got an influence auger at your disposal, that takes up a large amount of area in your truck. Even so, you’re managing fastidious instrumentation which will close up at a moment’s notice. assumptive your auger is up to the duty, you’ll still ought to pay on a daily basis a complete day excavation posts, intermixture cement, setting the posts so awaiting the cement to dry.
That’s tired the past currently due to our proprietary fence driving methodology. With our method, you’ll be able to drive fence posts year-round with no excavation, no cement, and no mess. The result’s a cleaner job in less time.
With our concrete-free post driving system, you’ll be able to pull a full four feet of post into the bottom. The result’s the foremost stable and cleanest fence installation doable with superior wind strength, no heaving, and no dirt removal.
Once you’ve driven every of the posts, you’ll be able to locomote to putting in our proprietary Qwik-Collars.
3. INSTALL QWIK-COLLARS
Now, place your Qwik-Collars over each post and secure the collars to every post mistreatment self-tapping metal screws. These collars are vital to maintaining the wonder of the vinyl fence over time, as they assist to equally distribute the strain of the fence from the posts to the strongest components of the fence. Once you’ve put in the collars, it’s time to maneuver on to sleeving the vinyl posts.
4. SLEEVE VINYL POSTS
Once you’ve driven your galvanized posts and other Qwik-Collars, it’s time to feature the vinyl post sleeves to your fence. simply place the vinyl sleeve over your post, and make sure that they’re plumb. Leave regarding 1/16” of area between your line and therefore the fence post. Repeat this method for every galvanized post you’ve driven. Once your posts are all sleeved and measured, you’ll be able to locomote to putting in the lowest rails.
5. INSERT BOTTOM RAILS
First, attach lock rings to every finish of your bottom rail. Then, depress the lock ring and fix the primary facet of the lowest rail into the post. Once you unleash the lock ring, the lowest rail are going to be secured in situ within the post. Next, locomote to the opposite facet of the lowest rail, depress the lock ring and fix that facet of the lowest rail to the fence post. Repeat this method with every bottom rail till each post incorporates a bottom rail connecting it to consecutive post.
6. SET POST HEIGHTS
Now, modify the post heights to make sure that every post incorporates a uniform height. At now, check to form positive that each post is plumb all over again. Once the post heights are set, it’s time to put in the vinyl pickets.
7. INSTALL VINYL PICKETS
Once the post heights are set for every section of fence, install every of the vinyl privacy slats into the lowest rail of the fence. make sure that every picket is flush with the picket before it till all of the pickets are put in. Repeat this method for every section of fence before moving on to put in the highest rails.
8. INSTALL high RAILS
Once the pickets are put in for every section of fence, install the highest rail to the posts. This method is nearly clone of putting in the lowest rail. Attach lock rings to every finish of the highest rail. Then, depress the lock ring and fix the primary facet of the highest rail to the post. Once that facet is secured, move to the opposite facet of the highest rail, depress the lock ring and place the highest rail within the post. unleash the lock ring, and therefore the high rail can lock into place. The fence installation is almost complete.
9. INSTALL RAIL TIES AND POST CAPS
Now that the fence is nearly complete, we’re about to install the rail ties to feature extra strength and stability to the fence. These ties can facilitate forestall the fence from deformation and bowing over time. Place a rail tie inside every vinyl fence post. Before we have a tendency to secure the tie, we’ll use it as a templet to drill pilot holes within the high rail of the fence. Drill your pilot holes through the rail tie, so secure the rail tie mistreatment the acceptable screws.
Once you’ve put in rail ties for every fence post, it’s time to complete the duty by putting in post caps. Brush the lowest of every post cap with glue or a polymer adhesive, ensuring that there’s a skinny layer of adhesive across each a part of the surface which will create contact with the fence post. Then, firmly press every fence cap into place and make sure that the adhesive is creating solid contact with the fence posts